Univertor AM-T
Univertor
Pick-up chuck lathe for medium-sized to large workpieces or short shafts of up to 220 mm component height/length in the transfer system.
-
Twin-spindle design with pick-up spindle and vertical counter spindle
Multifunctional slide for processing involving drilling and milling
High workpiece-change precision due to the transfer system
Easy handling of parts
Large variety of customization options
The compact machine models of the UNIVERTOR AM-T series are
ideally suited for the complete machining of chuck turned parts in two set-ups. These include,
among others, crown wheels, differential casings or flange parts with a diameter of up to 420 mm and a
maximum height of 350 mm.
In the working area of the UNIVERTOR AM-T with a vertical
spindle-slide layout and multifunctional slide, the workpieces are stepped through the machine
according to the transfer principle. The transfer takes place directly from the hanging pick-up
spindle into the standing vertical spindle. The turrets, drill heads or multi-function slides
which are additionally mounted on the special stand module enable varied processing options.
Pick-up chuck lathe for medium-sized to large workpieces or short shafts of up to 220 mm component height/length in the transfer system.
-
Twin-spindle design with pick-up spindle and vertical counter spindle
Multifunctional slide for processing involving drilling and milling
High workpiece-change precision due to the transfer system
Easy handling of parts
Large variety of customization options
The compact machine models of the UNIVERTOR AM-T series are
ideally suited for the complete machining of chuck turned parts in two set-ups. These include,
among others, crown wheels, differential casings or flange parts with a diameter of up to 420 mm and a
maximum height of 350 mm.
The machines are designed to be flexible and are ideally suited
for piece-cost-effective complete machining of various lot sizes while meeting extremely high quality
standards. Right or left machine configuration versions allow ideal adaptation to the production flow.
Technical data on the UNIVERTOR AM-T |
Front spindle bearing diameter |
mm |
120 |
Number of driven tools |
|
12 |
Travel path X axis |
mm |
1400 |
Working stroke Z1 axis |
mm |
350(500) |
Working stroke Z2 axis |
mm |
- |
Rapid motion speed X axis |
m/min |
60/75 |
Rapid motion speed Z axis |
m/min |
30 |
Special feature |
|